Stockton’s ordinance says interceptors are “fully pumped out and cleaned once every three months or when the combined FOG and solids accumulation ... equals 25 percent of the design hydraulic depth of the grease interceptor, whichever occurs first.” A light kitchen pays the calendar; a busy one pays the fill line. The table estimates which rule binds each kitchen type and what a year costs at the ranges on our cost page.
Indoor traps have no three-month language of their own; the practical rule is the 25% ceiling, which a small unit behind a fryer reaches in weeks.
Estimated annual cost by kitchen type
| Kitchen | Assumed | Device | Est. interval | Services / yr | Per service* | Per year* |
|---|---|---|---|---|---|---|
| Coffee shop or bakery | 150 meals/day, 0.7× load, 6 days/wk | 50-gal under-sink trap (50 gal) | ~23 days | 16 | $135–$240 | $2,160–$3,840 |
| Pizza, sandwich or taco shop | 250 meals/day, 1× load, 7 days/wk | 500-gal interceptor (500 gal) | ~85 days | 5 | $325–$700 | $1,625–$3,500 |
| Full-service restaurant | 300 meals/day, 1× load, 7 days/wk | 1,000-gal interceptor (1,000 gal) | ~90 days (calendar cap) | 5 | $325–$700 | $1,625–$3,500 |
| Fryer-heavy quick service, wings, BBQ | 400 meals/day, 1.5× load, 7 days/wk | 1,000-gal interceptor (1,000 gal) | ~70 days | 6 | $325–$700 | $1,950–$4,200 |
| Institution: school, hospital, 24-hour kitchen | 1200 meals/day, 1× load, 7 days/wk | 3,000-gal interceptor (3,000 gal) | ~90 days (calendar cap) | 5 | $550–$1,300 | $2,750–$6,500 |
*Per-service figures are the ranges already on this site’s cost page (nobody in this market publishes a grease price, us included; see that page for where the ranges come from). Intervals come from the same accumulation model as the calculator: about 0.035 lb of grease and solids per meal, scaled by menu, 7.4 lb per gallon, pumped when the device reaches 20% of capacity so it never operates over the 25% line. Stockton requires interceptors pumped “once every three months or when ... 25 percent,” whichever occurs first; where the model says longer than three months, the cap is shown instead. Annual = services per year × per-service range. The first pump-out reading replaces every estimate on this page.
Reading the rows
- Coffee shop or bakery on a 50-gallon trap. Light load, small device. The model still lands at a few weeks per service because fifty gallons is not much headroom; a larger trap or a small interceptor is the lever that cuts this row.
- Taqueria, pizza, sandwich on a 500. Moderate volume; the 25% line usually arrives before three months does.
- Full-service restaurant on a 1,000. The bigger tank helps: the model says four to five months to the planning line, so the three-month cap binds first. A busier week than assumed moves you to the fill line.
- Fryer-heavy. The calculator’s own 1.5× “heavy” setting. The three-month cap never comes into play; the 25% rule does all the work, and the Director may require more frequent cleaning.
- Institutions. A 3,000-gallon tank behind a 1,200-meal day reaches the planning line in about three and a half months, so the three-month cap binds. The size buys retention time for the sewer, not a longer interval for you.
What is not in the table
Emergency call-outs, jetting after a backup, re-inspection fees, citations and a city-performed pump-out billed back to you. A kitchen that keeps the schedule above never sees those lines; one that does not can spend a year’s service budget in a single bad week.
How to turn an estimate into your number
Run the calculator with your real tank size and meal count, then book the first service. The depth reading that day replaces the model; the second visit is scheduled from the reading, and the manifest goes in your file.
Your tank, your number
Tank size and meals per day. We quote flat, and the first reading sets the real interval.
Call (209) 292-2953